Differences

This shows you the differences between two versions of the page.

chibios:articles:stm32vl_discovery [2012/01/06 21:45]
giovanni [Board Setup]
chibios:articles:stm32vl_discovery [2012/11/05 18:46] (current)
giovanni [Board Setup]
Line 117: Line 117:
 Now let's connect the various parts: Now let's connect the various parts:
  
-  - Connect the STM32F4-Discovery PA9 (TX) pin to the RS232 board transmitter input. +  - Connect the STM32VL-Discovery PA9 (TX) pin to the RS232 board transmitter input. 
-  - Connect the STM32F4-Discovery PA10 (RX) pin to the RS232 board receiver output.+  - Connect the STM32VL-Discovery PA10 (RX) pin to the RS232 board receiver output.
   - Connect the STM32VL-Discovery 3V3 pin to the RS232 board VCC pin.   - Connect the STM32VL-Discovery 3V3 pin to the RS232 board VCC pin.
   - Connect the STM32VL-Discovery 3V3 pin to the potentiometer pin 1.   - Connect the STM32VL-Discovery 3V3 pin to the potentiometer pin 1.
 
chibios/articles/stm32vl_discovery.txt · Last modified: 2012/11/05 18:46 by giovanni
 
Except where otherwise noted, content on this wiki is licensed under the following license:GNU Free Documentation License 1.3